-- Text used by Module:Convert, for fa.wikipedia.org. -- This is a separate module to simplify translation for use on another wiki. -- See [[:en:Template:Convert/Transwiki guide]] if copying to another wiki.  local translation_table = { 	numdot = '٫',        -- decimal mark 	numsep = '٬',        -- separator for number grouping 	per_word = 'بر',     -- for units like "miles per gallon" 	plural_suffix = '',  -- disable plural unit names 	from_en = { 		['0'] = '۰', 		['1'] = '۱', 		['2'] = '۲', 		['3'] = '۳', 		['4'] = '۴', 		['5'] = '۵', 		['6'] = '۶', 		['7'] = '۷', 		['8'] = '۸', 		['9'] = '۹', 	}, 	to_en = {        -- Persian Numbers 	             	['۰'] = '0',              		['۱'] = '1', 	             	['۲'] = '2', 	             	['۳'] = '3',              		['۴'] = '4',              		['۵'] = '5', 	             	['۶'] = '6', 	             	['۷'] = '7', 	             	['۸'] = '8', 	             	['۹'] = '9',        -- Arabic Numbers 		['٠'] = '0', 		['١'] = '1', 		['٢'] = '2', 		['٣'] = '3', 		['٤'] = '4', 		['٥'] = '5', 		['٦'] = '6', 		['٧'] = '7', 		['٨'] = '8', 		['٩'] = '9', 	}, 	specials = {         -- for special processing by makeunits 		-- PLEASE DO NOT CHANGE THE FOLLOWING 		-- until all the units have been fixed 		-- (the text used here must be the same as that used in the unit definitions). 		utype = { 			-- ["unit type in local language"] = "name_used_in_this_script" 			["fuel efficiency"] = "type_fuel_efficiency", 			["length"] = "type_length", 			["temperature"] = "type_temperature", 			["volume"] = "type_volume", 		}, 		ucode = { 			exception = { 				-- ["unit code in local language"] = "name_used_in_module_convert" 				["ft"] = "integer_more_precision", 				["in"] = "subunit_more_precision", 				["lb"] = "integer_more_precision", 			}, 			istemperature = { 				-- Common temperature scales (not keVT or MK). 				-- ["unit code in local language"] = 1 				["C"] = true, 				["F"] = true, 				["K"] = true, 				["R"] = true, 			}, 			usesymbol = { 				-- Use unit symbol not name if abbr not specified. 				-- ["unit code in local language"] = 1 				["C"] = 1, 				["F"] = 1, 				["K"] = 1, 				["R"] = 1, 				["C-change"] = 1, 				["F-change"] = 1, 				["K-change"] = 1, 			}, 			alttype = { 				-- Unit has an alternate type that is a valid conversion. 				-- ["unit code in local language"] = "alternate type in local language" 				["Nm"] = "energy", 				["ftlb"] = "torque", 				["ftlb-f"] = "torque", 				["ftlbf"] = "torque", 				["inlb"] = "torque", 				["inlb-f"] = "torque", 				["inlbf"] = "torque", 				["inoz-f"] = "torque", 				["inozf"] = "torque", 			}, 		}, 	}, 	mtext = { 		-- Text used by Module:Convert/makeunits. 		titles = { 			-- name_used_in_this_script = "Title of page" 			conversion_data = 'Module:Convert/documentation/conversion data/توضیحات', 		}, 	}, }  -- Some units accept an SI prefix before the unit code, such as "kg" for kilogram. local SIprefixes = { 	-- The prefix field is what the prefix should be, if different from the prefix used. 	['Y'] = { exponent = 24, name = 'یوتا',                  }, 	['Z'] = { exponent = 21, name = 'زتا',                  }, 	['E'] = { exponent = 18, name = 'اگزا'  ,                  }, 	['P'] = { exponent = 15, name = 'پتا' ,                  }, 	['T'] = { exponent = 12, name = 'ترا' ,                  }, 	['G'] = { exponent =  9, name = 'گیگا' ,                  }, 	['M'] = { exponent =  6, name = 'مگا' ,                  }, 	['k'] = { exponent =  3, name = 'کیلو' ,                  }, 	['h'] = { exponent =  2, name = 'هکتا',                  }, 	['da']= { exponent =  1, name = 'دکا'                    }, 	['d'] = { exponent = -1, name = 'دسی' ,                  }, 	['c'] = { exponent = -2, name = 'سانتی',                  }, 	['m'] = { exponent = -3, name = 'میلی',                  }, 	['μ'] = { exponent = -6, name = 'میکرو', prefix = 'µ'     },  -- key = 'GREEK SMALL LETTER MU' (U+03BC) utf-8 CE BC 	['µ'] = { exponent = -6, name = 'میکرو',                  },  -- key = 'MICRO SIGN' (U+00B5) utf-8 C2 B5 	['u'] = { exponent = -6, name = 'میکرو', prefix = 'µ'     },  -- not an SI prefix, but allow for people typing this 	['n'] = { exponent = -9, name = 'نانو' ,                  }, 	['p'] = { exponent =-12, name = 'پیکو' ,                  }, 	['f'] = { exponent =-15, name = 'فمتو',                  }, 	['a'] = { exponent =-18, name = 'آتو' ,                  }, 	['z'] = { exponent =-21, name = 'زپتو',                  }, 	['y'] = { exponent =-24, name = 'یوکتو',                  }, }  -- Some units can be qualified with one of the following prefixes, when linked. local customary_units = { 	{ "US", link = "دستگاه آمریکایی" }, 	{ "U.S.", link = "دستگاه آمریکایی" }, 	{ "imperial", link = "دستگاه بریتانیایی" }, 	{ "imp", link = "دستگاه بریتانیایی" }, }  -- Names when using engineering notation (a prefix of "eN" where N is a number; example "e6km"). -- key = { "name", link = "article title", exponent = numeric_key_value } -- If lk=on and link is defined, the name of the number will appear as a link. local eng_scales = { 	["3"]  = { "هزار", exponent = 3 }, 	["6"]  = { "میلیون", exponent = 6 }, 	["9"]  = { "میلیارد", link = "۱۰۰۰۰۰۰۰۰۰ (عدد)", exponent = 9 }, 	["12"] = { "بیلیون", link = "۱۰۰۰۰۰۰۰۰۰۰۰۰ (عدد)", exponent = 12 }, 	["15"] = { "بیلیارد", link = "۱۰۰۰۰۰۰۰۰۰۰۰۰۰۰۰ (عدد)", exponent = 15 }, }  -- One of the following categories is included in the text of each message. local all_categories = { 	unit = "[[رده:یکای نادرست الگوی تبدیل]]", 	option = "[[رده:گزینه نادرست الگوی تبدیل]]", }  -- For some error messages, the following puts the wanted style around -- each unit code marked like '...%{ft%}...'. local unitcode_regex = '%%([{}])' local unitcode_replace = { ['{'] = '"', ['}'] = '"' }  -- no longer need the more elaborate substitute used before 2013-09-28  -- All messages that may be displayed if a problem occurs. local all_messages = { 	-- Message format string, %s parameters: anchor, title, text, category. 	-- Each displayed message starts with "Convert:" so can easily locate by searching article. 	cvt_format = '<sup class="noprint Inline-Template" style="white-space:nowrap;">[<i>[[Help:Convert messages#%s|<span title="ابزار تبدیل: %s">ابزار تبدیل: %s</span>]]</i>]</sup>%s', 	-- Each of following messages is a table: 	-- { [1] = 'title',         -- mouseover title text 	--   [2] = 'text',          -- link text displayed in article 	--   [3] = 'category key',  -- key to lookup category in all_categories 	--   [4] = 'anchor',        -- anchor for link to relevant section on help page 	--   regex = gsub_regex, 	--   replace = gsub_table, 	-- }                    Mouseover title text                           Link text               CatKey     Anchor 	cvt_bad_num        = { 'Value "%s" must be a number'                , 'invalid number'      , 'option',  'invalid_number'       }, 	cvt_big_prec       = { 'Precision "%s" is too large'                , 'precision too large' , 'option',  'precision_too_large'  }, 	cvt_invalid_num    = { 'Number has overflowed'                      , 'number overflow'     , 'option',  'number_overflow'      }, 	cvt_no_num         = { 'Needs the number to be converted'           , 'needs a number'      , 'option',  'needs_number'         }, 	cvt_no_num2        = { 'Needs another number for a range'           , 'needs another number', 'option',  'needs_another_number' }, 	cvt_bad_frac       = { 'frac "%s" must be an integer above 1'       , 'invalid fraction'    , 'option',  'invalid_fraction'     }, 	cvt_bad_prec       = { 'Precision "%s" must be an integer'          , 'invalid precision'   , 'option',  'invalid_precision'    }, 	cvt_bad_sigfig     = { 'sigfig "%s" must be a positive integer'     , 'invalid sigfig'      , 'option',  'invalid_sigfig'       }, 	cvt_empty_option   = { 'Ignored empty option "%s"'                  , 'empty option'        , 'option',  'empty_option'         }, 	cvt_no_spell       = { 'Spelling is not available'                  , 'bug, ask for help'   , 'option',  'ask_for_help'         }, 	cvt_unknown_option = { 'Ignored invalid option "%s"'                , 'invalid option'      , 'option',  'invalid_option'       }, 	cvt_bad_default    = { 'Unit "%s" has an invalid default'           , 'bug, ask for help'   , 'unit'  ,  'ask_for_help'         }, 	cvt_bad_unit       = { 'Unit "%s" is invalid here'                  , 'unit invalid here'   , 'unit'  ,  'unit_invalid_here'    }, 	cvt_no_default     = { 'Unit "%s" has no default output unit'       , 'bug, ask for help'   , 'unit'  ,  'ask_for_help'         }, 	cvt_no_unit        = { 'Needs name of unit'                         , 'needs unit name'     , 'unit'  ,  'needs_unit_name'      }, 	cvt_unknown        = { 'Unit name "%s" is not known'                , 'یکای ناشناخته'        , 'unit'  ,  'یکای ناشناخته'         }, 	cvt_should_be      = { '%s'                                         , 'ambiguous unit'      , 'unit'  ,  'ambiguous_unit', regex = unitcode_regex, replace = unitcode_replace }, 	cvt_mismatch       = { 'Cannot convert "%s" to "%s"'                , 'unit mismatch'       , 'unit'  ,  'unit_mismatch'        }, 	cvt_bug_convert    = { 'Bug: Cannot convert between specified units', 'bug, ask for help'   , 'unit'  ,  'ask_for_help'         }, 	cvt_lookup         = { 'Unit "%s" is incorrectly defined'           , 'bug, ask for help'   , 'unit'  ,  'ask_for_help'         }, }  -- Text to join input value/unit with output value/unit. local disp_joins = { 	["or"]         = { " یا "    , ""  }, 	["sqbr-sp"]    = { " ["      , "]" }, 	["sqbr-nbsp"]  = { "&nbsp;[" , "]" }, 	["comma"]      = { "، "      , ""  }, 	["slash-sp"]   = { " / "     , ""  }, 	["slash-nbsp"] = { "&nbsp;/ ", ""  }, 	["slash-nosp"] = { "/"       , ""  }, 	["b"]          = { " ("      , ")" }, 	["br"]         = { "<br/>"   , ""  }, }  -- Text to separate values in a range. local range_types = { 	-- Specifying a table requires "off" and "on" values (for "abbr=off" and "abbr=on"); 	-- other fields are optional. 	-- When "adj=on|abbr=off" applies, spaces in range text are replaced with hyphens. 	-- With "exception = true", that also occurs with "adj=on|abbr=on". 	-- If "adj" is defined here, that text (unchanged) is used with "adj=on". 	["+"]      = " + ", 	[","]      = ",&nbsp;", 	[", and"]  = "، و ", 	[", or"]   = "، یا ", 	["by"]     = " در ", 	["-"]      = "–", 	["to about"] = " تا حدود ", 	["and"]    = { off = " و ", on = " و ", exception = true }, 	["and(-)"] = { off = " و ", on = "–"                       }, 	["or"]     = { off = " یا " , on = " یا " , exception = true }, 	["to"]     = { off = " تا " , on = " تا " , exception = true }, 	["to(-)"]  = { off = "&nbsp;تا ", on = "–" }, 	["+/-"]    = { off = "&nbsp;±&nbsp;", on = "&nbsp;±&nbsp;", adj = "&nbsp;±&nbsp;", is_range_change = true }, 	["x"]      = { off = " در ", on = " ×&nbsp;", is_range_x = true }, 	["xx"]     = "&nbsp;×&nbsp;", 	["*"]      = "×",  -- use "*" to replace "x" in {{convert/2}} which is different from "x" in old {{convert}} }  local range_aliases = { 	-- ["alternative name for a range"] = "standard range name" 	["&"]        = "و", 	["–"]        = "-", 	["&ndash;"]  = "-", 	["to-"]      = "to(-)", 	["×"]        = "x", 	["&times;"]  = "x", 	["±"]        = "+/-", 	["&plusmn;"] = "+/-", 	["و"]        = "and", 	["در"]       = "by", 	["یا"]       = "or", 	["تا"]       = "to", }  -- The following "words" are accepted to make a simple range, for example, {{convert|1-2|ft}}. -- Words must be in correct order for searching, for example, '-' after '+/-' and 'x' after 'xx'. -- Put '-' last so can have a simple range with negative values as in {{convert|-5 to -1|C}}. local range_words = { '+/-', 'to(-)', 'xx', 'x', '*', 'to', 'or', 'by', '–' , '-' }  local ranges = { 	types = range_types, 	aliases = range_aliases, 	words = range_words, }  -- Valid option names. local en_option_name = { 	-- ["local text for option name"] = "en name used in this module" 	["abbr"] = "abbr", 	["adj"] = "adj", 	["comma"] = "comma", 	["debug"] = "debug", 	["disp"] = "disp", 	["frac"] = "frac", 	["lang"] = "lang", 	["lk"] = "lk", 	["near"] = "near", 	["order"] = "order", 	["round"] = "round", 	["sigfig"] = "sigfig", 	["sing"] = "adj",                   -- "sing" is an old alias for "adj" 	["sortable"] = "sortable", 	["sp"] = "sp", 	["spell"] = "spell", }  -- Valid option values. -- Convention: parms.opt_xxx refers to an option that is set here -- (not intended to be set by the template which invokes this module). -- Example: At en.wiki, "abbr" includes: --     ["comma"] = "opt_nocomma" -- As a result, if the template uses abbr=comma, this script sets: --     parms["opt_nocomma"] = true --     parms["abbr"] = nil -- Therefore parms.abbr will be nil, or will have one of the listed values -- that do not start with "opt_". local en_option_value = { 	["abbr"] = { 		-- ["local text for option value"] = "en value used in this module" 		["comma"] = "opt_nocomma",      -- no numsep in input or output numbers 		["def"] = "",                   -- ignored (some wrapper templates call convert with "abbr=def" to mean "default abbreviation") 		["h"] = "on",                   -- abbr=on + use "h" for hand unit (default) 		["hh"] = "opt_hand_hh",         -- abbr=on + use "hh" for hand unit 		["in"] = "in",                  -- use symbol for LHS unit 		["mos"] = "mos",                -- in a range, repeat the input unit (no longer used) 		["none"] = "off",               -- old name for "off" 		["off"] = "off",                -- use name for all units 		["on"] = "on",                  -- use symbol for all units 		["out"] = "out",                -- use symbol for RHS unit (default) 		["values"] = "opt_values",      -- show only input and output numbers, not units 		["~"] = "opt_also_symbol",      -- show input unit symbol as well as name 	}, 	["adj"] = { 		["1"] = "opt_singular",         -- unit name is singular when value satisfies: (-1 <= v and v < 0) or (0 < v and v <= 1) 		["flip"] = "opt_flip",          -- reverse order of input/output 		["j"] = "opt_use_nbsp",         -- "join": use "&nbsp;" instead of " " between value and unit name 		["mid"] = "opt_adjectival, opt_adj_mid",  -- adj=on with user-specified text after input unit (between input and output) 		["nocomma"] = "opt_nocomma",    -- no numsep in input or output numbers 		["off"] = "",                   -- ignored (off is the default) 		["on"] = "opt_adjectival",      -- unit name is singular and hyphenated 		["pre"] = "opt_one_preunit",    -- user-specified text before input unit 		["ri0"] = "ri0",                -- round input with precision = 0 		["ri1"] = "ri1",                -- round input with precision = 1 		["ri2"] = "ri2",                -- round input with precision = 2 		["ri3"] = "ri3",                -- round input with precision = 3 	}, 	["comma"] = { 		["5"] = "opt_comma5",           -- only use numsep grouping if 5 or more digits 		["gaps"] = "opt_gaps",          -- use gaps, not numsep, to separate groups of digits 		["gaps5"] = "opt_gaps, opt_comma5",  -- opt_gaps + opt_comma5 	}, 	["debug"] = { 		["yes"] = "opt_sortable_debug", -- make the normally hidden sort key visible 	}, 	["disp"] = { 		["/"] = "slash",                -- join: '/' 		["2"] = "opt_output_only",      -- display only output value and symbol/name (not input) 		["5"] = "opt_round5",           -- round output value to nearest 5 		["b"] = "b",                    -- join: '(...)' 		["br"] = "br",                  -- join: '<br/>' 		["comma"] = "comma",            -- join: ',' 		["flip"] = "opt_flip",          -- reverse order of input/output 		["flip5"] = "opt_flip, opt_round5",  -- disp=flip + disp=5 		["nocomma"] = "opt_nocomma",    -- no numsep in input or output numbers 		["number"] = "opt_output_number_only",  -- display output value (not input, and not output symbol/name) 		["or"] = "or",                  -- join: 'or' 		["out"] = "opt_output_only", 		["output number only"] = "opt_output_number_only", 		["output only"] = "opt_output_only", 		["preunit"] = "opt_two_preunits",    -- user-specified text before input and output units 		["s"] = "slash",                -- join: '/' 		["slash"] = "slash",            -- join: '/' 		["sqbr"] = "sqbr",              -- join: '[...]' 		["table"] = "opt_table",        -- output is suitable for a table cell with align="right" 		["tablecen"] = "opt_tablecen",  -- output is suitable for a table cell with align="center" 		["u2"] = "opt_output_unit_only",  -- display output symbol/name (not input, and not output value) 		["unit"] = "opt_input_unit_only", -- display input symbol/name (not output, and not input value) 		["unit or text"] = "opt_input_unit_only, opt_ignore_error", -- display input symbol/name, or given unit code if not known 		["unit2"] = "opt_output_unit_only", 		["x"] = "x",                    -- join: <first>...<second> (user-specified text) 	}, 	-- frac=x is handled as a special case: x must be an integer (possibly in local language) = 1 or more 	["lang"] = { 		["en"] = "opt_lang_en",         -- use en digits for output, regardless of local language 	}, 	["lk"] = { 		["in"] = "in",                  -- link LHS unit name or symbol 		["off"] = "off",                -- do not link: same as default except for hand unit 		["on"] = "on",                  -- link all unit names or symbols (but not twice for the same unit) 		["out"] = "out",                -- link RHS unit name or symbol 	}, 	["near"] = { 		["5"] = "opt_round5",           -- round output value to nearest 5 	}, 	["order"] = { 		["flip"] = "opt_flip",          -- reverse order of input/output 	}, 	["round"] = { 		["5"] = "opt_round5",           -- round output value to nearest 5 		["25"] = "opt_round25",         -- round output value to nearest 25 		["each"] = "opt_round_each",    -- using default precision in a range, round each output separately (default uses highest precision of each item in range) 	}, 	-- sigfig=x is handled as a special case: x must be an integer (possibly in local language) = 1 or more 	["sortable"] = { 		["off"] = "",                   -- ignored (off is the default) 		["in"] = "opt_sortable_in",     -- output numeric hidden sort field for use in a sortable table, based on input 		["on"] = "opt_sortable_in",     -- same 		["out"] = "opt_sortable_out",   -- same, based on output 	}, 	["sp"] = { 		["us"] = "opt_sp_us",           -- use U.S. spelling (like "meter" instead of default "metre") 	}, 	["spell"] = {                       -- only English spelling is supported; not scientific notation; only some fractions 		["in"] = "opt_spell_in",        -- spell input value in words 		["In"] = "opt_spell_in, opt_spell_upper",                -- spell input value in words with first letter uppercase 		["on"] = "opt_spell_in, opt_spell_out",                  -- spell input and output values in words 		["On"] = "opt_spell_in, opt_spell_out, opt_spell_upper", -- same, with first letter of first word in result uppercase 	}, }  return { 	SIprefixes = SIprefixes, 	all_categories = all_categories, 	all_messages = all_messages, 	currency = { ['$'] = true, ['£'] = true }, 	customary_units = customary_units, 	disp_joins = disp_joins, 	en_option_name = en_option_name, 	en_option_value = en_option_value, 	eng_scales = eng_scales, 	ranges = ranges, 	translation_table = translation_table, }